Homo Polymer

V 30 G is a polypropylene homopolymer with good flow properties for injection moulding and compounding applications. V 30 G offers a medium-high fluidity, easy mould filling and short cycle times. The final items moulded with V 30 G exhibit good dimensional stability and high stiffness. The product is well suited for the production of thin-wal led articles and articles with long flow paths such as containers, boxes, caps, closures, household articles and toys. V 30 G is also an excellent polymer base for compounding and master batches.

General Properties

Category : Homo Polymer
Grade Name : V30G
Manufacturer : MARUN
MFR : 0.04(2.16k/g)
Density : 0.954
Applications :
Heavy duty jumbo bags,Furniture,Caps,Closures,Toys
Properties Unit Typical value Test Method
Physical properties
Melt flow rate (230'C, 2.16 kg) Dg/min 16 ISO 1133
Density g/cm3 0.9 ISO 1183
Mechanical properties
Flexural modulus N/mm2 1550 ISO 178
Tensile strength yield N/mm2 35 ISO R527
Elongation at yield % 13 ISO R 527
lzod impact strenghh (notched) at 23 °C kJ/m2 3 ISO 180
Hardness Shore D points 72 ISO 868)
Thermal properties
Vicat softening point (9.8 N) oC 155 ISO 306/A
H.D.T. (0.46 Mpa) oC 117 ISO 75/B
Accelerated oven ageing in air (forced circulation) at 150 °C hour 360 IS04577

 It is suitable for food contact.
 Values shown are averages and are not to be considered as p roduct specification
These values may shift slightly as additional data are accumlsted.

 ISO test methods are the lates under the societys current procedures. All specimens
are prepared by injection moulding .