Caps & Clouser

HD-5030SA is a high-density polyethylene copolymer grade with a narrow molecular weight distribution, specially developed for injection moulding application requiring very high environmental stress cracking resistance. Articles produced from this grade exhibit excellent impact strength and stiffness, low warpage, high purity and quality controlled organoleptic properties, this grade is particularly intended for the packaging in direct contact with beverages. In order to preserve the excellent organoleptic properties, it is important not to exceed a melt temperature of 250°C during processing.

General Properties

Category : Caps & Clouser
Grade Name : 5030(HD5030SA)
Manufacturer : TABRIZ
MFR : 3.1(5k/g)
Density : 0.951
Applications :
Hot filled and crbonated soft drinks,beverage caps,beverage bottles caps of sparliking water,
Property Test Method Unit Typical Value
Physical Properties
MFI(190°C/ 2.16Kg) ASTM D 1238 gr/10min 2.0
MFI(190°C / 5.0Kg) - - -
Density ASTM D 1505 gr/cm³ 0.950
Anti Oxidant
Slip Agent
Mechanical Properties
Flexural Modulus ASTM D 790 MPa 1100
Tensile Strength at yield ASTM D 638 MPa 27
Elongation at Break ASTM D 638 % 1000
Charpy Impact Strength ASTM D 256 kj/m² 15
Hardness Shore D ASTM D 2240 - 65
ESCR, F50, 10% Igepal, ASTM D1894 hr 30
Thermal Properties
Vicat Softening Temperature ASTM D 1525 °C 123
Melting Point ASTM D2117 °C 130

All above mentioned data are typical values and not to be construed as real specifications.Users should confirm results by their own tests.For more information about guaranteed items, please refer to S.S.S.(Standard Sales