ABS 50

ABS 50

ABS

Classification: General purpose Characteristic: Medium Impact, High rigidity Application:Electronic and Electrical parts, vacuum cleaner, washing machine cover and Refrigerator door cap & etc


General Properties

Category : ABS
Grade Name : ABS 50
Manufacturer : GHAED BASIR
MFR : 3.4(5k/g)
Density: 0.954
Applications :
Office supplies,Home appliances casting,Heat resistant home,Printing
Property Test method (ASTM) Test condition Unit Typical value ABS-38 Specification
Izod impact D-256 6.4 mm , notched Kj/m² 23 Min16
Melt flow index D-1238 220ºc , 10 kg gr/10 min 35 0.35-0.75&4-10
Rock well hardness D-785 ........ R-scale 109 100-120
HDT D-648 1.82 m pa ºc 85 Min97
Vicat softening Temp D-1525 5kg/50°c ºc 95 Min 110
Tensile strength D-638 23ºc , 50 mm/min Kg/cm² 455 Min 440
Tensile elongation D-638 23ºc , 50 mm/min % 20 Min 16
Flexural strength D-790 23ºc , 2.8 mm/min Kg/cm² 650 Min 650
Flexural Modulus D-790 23ºc , 2.8 mm/min Kg/cm² 22000 Min20000
Specific Gravity D-792 23ºc .. 1.04 1.04
Molding Shrinkage D-955 ... % 0.4-0.7 0.4-0.7
Flammability Ul94 1/8inch(3.2mm) ... HB HB
Rear Temp(°c) Center Temp (°c) Center Temp (°c) Front Temp (°c) Nozzle Temp(°c) Melt Temp (°c)
190-200 200-210 210-220 210-220 215-225 230
Mold Temp (°c) Filling Speed - - - -
60-80 Slow-Med - - - -

TYPICAL ABS PROCESSING CONDITIONS
DRYING: it is recommended that GBPC ABS Resins be dried at (80-85°c)for 3 hours.

The following molding conditions are recommended starting point for GBPC ABS Resin. A
moisture level of ≤0.1% should be reached before injection molding the resin.

Some modifications may be required depending on the specific molding equipment and part
configuration.


SHARE:

OUR PRODUCTS