Homo Polymer

C 30 S is a polypropylene homopolymer with a good flow properties and is particularly suitable for the extrusion of film yam, monofilament, cast film and sheet. C 30 S combines outstanding process ability with good mechanical properties. C 30 S is particularly suitable to produce film yam with the cast film process. Film yam of C 30 S is used for baler twines, packaging twines and ropes. C 30 Si s well suited for the production of monofilament used for instance in brush and broom filling and technical applications. Other applications of C 30 Sare monolayer or coextruded film for packaging, thin sheet for stationery folders and sheet for thermoforming. C 30 S is also used for the extrusion of straws.

General Properties

Category : Homo Polymer
Grade Name : C30S
Manufacturer: MARUN
MFR : 6(2.16k/g)
Density : 0.954
Heavy duty jumbo bags,Furniture,Caps,Closures,Toys
Properties Unit Typical value Test Method
Physical properties Dg/min - -
Melt flow rate (230'C, 2.16 kg) g/cm3 6 ISO 1133
Density - 0.9 ISO 1183
Mechanical properties N/mm2 - -
Flexural modulus N/mm2 1500 ISO 178
Tensile strength yield - 34 ISO R527
Elongation at yield % 13 ISO R 527
lzod impact strenghh (notched) at 23 °C kJ/m2 4 ISO 180
Hardness Shore D points 71 ISO 868)
Thermal properties
Vicat softening point (9.8 N) oC 155 ISO 306/A
H.D.T. (0.46 Mpa) C 112 ISO 75/B
Accelerated oven ageing in air (forced circulation) at 150 °C hour 360 IS04577

 Values shown are averages and are not to be considered as p roduct specification
These values may shift slightly as additional data are accumlsted.

 ISO test methods are the lates under the societys current procedures. All specimens
are prepared by injection moulding .

 It is suitable for food contact.