0150(SD0150)

0150(SD0150)

ABS

SD150 is one of the styrenic terpolymer(ABS) grade with improved toughness and heat resistance versus HIPS grades. SD150 exhibits low shrinkage and good dimensional stability. SD150 is widely used in general injection molding applications.Use this information as a guide to aid you in selecting the proper resin for your application. Application: furniture,automotive parts ,general injection molding,appliances casing and home appliances with heatresistance characteristics. Drying: Drying prior to processing is recommended in a desiccant dehumidifying hopper dryer. An inlet air dew point of - 20°F (-29°C) or below isrecommended to achieve a moisture content 0.1%. Typical drying conditions are 2 hours at 180° - 190°F (82°-88°C). Drying for 4 hoursat 160° - 170°F (71°-77°C) is also adequate.


General Properties

Category : ABS
Grade Name : 0150(SD0150)
Manufacturer : TABRIZ
MFR : 1.7(5k/g)
Density : 0.954
Applications:
Office supplies,Home appliances casting,Heat resistant home,Printing
Properties Unit Typical value Test Method
MELT FLOW INDEX(200°C-5KG) g/10min 1.8 ASTM D-1238
IZOD IMPACT STRENGTH KJ/M2 22 ASTM D-256
VICAT SOFTENING POINT ( 50 °C/hr 1kg) oC 98 ASTM D-1525
BULK DENSITY KG/M3 600 -
TENSILE STRESS AT YEILD KGF/CM2 450 ASTM D-638
ROCKWELL HARDNESS(AT 23°C) R.SCALE 105 ASTM D-785

*All above mentioned data are typical values and not to be construed as real specifications.Users should confirm results by
their own tests.For more

information about guaranteed items, please refer to S.S.S.(Standard Sales Specifications)


SHARE:

OUR PRODUCTS