PC/ABS Alloy : Non Reinforced Grade Classification: General purpose>Injection grade Characteristic: Injection grade, high impact Resistance Application: GAC 244 is an unreinforced PC/ABS alloy which offers good impact strength and high heat resistance. Especially, metal plating is very easy with GAC 244. So GAC 244 could be used outdoor housing which need metal plating such as, automotive door handle, lamp housing, etc
Property | Test method (ASTM) | Test condition | Unit | Typical value | GAC 244 |
Izod impact | D-256 | 6.4 mm , notched | Kj/m² | 42 | Min38 |
Melt flow index | D-1238 | 230ºc , 21.6 kg | gr/10 min | 38 | 35-45 |
Rock well hardness | D-785 | ....... | R-scale | 100 | 90-110 |
HDT | D-648 | 1.82 m pa | ºc | 120 | Min115 |
Tensile strength | D-638 | 23ºc , 50 mm/min | Kg/cm² | 460 | Min450 |
Tensile elongation | D-638 | 23ºc , 50 mm/min | % | 100 | Min90 |
Flexural strength | D-790 | 23ºc , 2.8 mm/min | Kg/cm² | 800 | Min750 |
Flexural Modulus | D-790 | 23ºc , 2.8 mm/min | Kg/cm² | 2000 | Min18000 |
Specific Gravity | D-792 | 23ºc | -- | 1.08 | 1.08 |
Molding Shrinkage | D-955 | --- | % | 0.5-0.7 | 0.5-0.7 |
Flammability | Ul94 | 1/8inch(3.2mm) | --- | HB | HB |
Rear Temp(°c) | Center Temp (°c) | Center Temp (°c) | Front Temp (°c) | Nozzle Temp(°c) | Melt Temp (°c) |
230-240 | 230-240 | 240-250 | 250-260 | 260-270 | 260 |
Mold Temp (°c) | Filling Speed | - | - | - | - |
70-80 | Slow-Med | - | - | - | - |
The following molding conditions are recommended starting point for GBPC PC/ABS
alloy. A moisture level of
Some modifications may be required depending on the specific molding equipment and
part configuration.
DRYING: it is recommended that GBPC PC/ ABS Resins be dried at (80-95°c)for 3 hours.