Classification: General ABS>Heat Resistance grade Characteristic: Ultra Heat Resistance& High impact strength Application: Mirror housings, Hair dryer shells, Electric oven exterior parts, Automobile parts and etc..
Property | Test method (ASTM) | Test condition | Unit | Typical value | ABS-HU 650 specification | |
Izod impact | D-256 | 6.4 mm , notched | Kj/m² | 18 | Min16 | |
Melt flow index | D-1238 | 220ºc , 10 kg | gr/10 min | 4.0 | 1-4 | |
Rock well hardness | D-785 | ........ | R-scale | 110 | 100-120 | |
HDT | D-648 | 1.82 m pa | ºc | 105 | Min105 | |
Vicat softening Temp | D-1525 | 5kg/50°c | ºc | 128 | Min128 | |
Tensile strength | D-638 | 23ºc , 50 mm/min | Kg/cm² | 470 | Min 440 | |
Tensile elongation | D-638 | 23ºc , 50 mm/min | % | 22 | Min 16 | |
Flexural strength | D-790 | 23ºc , 2.8 mm/min | Kg/cm² | 700 | Min 670 | |
Flexural Modulus | D-790 | 23ºc , 2.8 mm/min | Kg/cm² | 22000 | Min20000 | |
Specific Gravity | D-792 | 23ºc | .. | 1.04 | 1.04 | |
Molding Shrinkage | D-955 | ... | % | 0.4-0.7 | 0.4-0.7 | |
Flammability | Ul94 | 1/8inch(3.2mm) | ... | HB | HB | |
Rear Temp(°c) | Center Temp (°c) | Center Temp (°c) | Front Temp (°c) | Nozzle Temp(°c) | Melt Temp (°c) | |
190-200 | 200-210 | 210-220 | 210-220 | 215-225 | 230 | |
Mold Temp (°c) | Filling Speed | - | - | - | - | |
60-80 | Slow-Med | - | - | - | - | 110 |
TYPICAL ABS PROCESSING CONDITIONS
DRYING: it is recommended that GBPC ABS Resins be dried at (80-85°c)for 3 hours.
The following molding conditions are recommended starting point for GBPC ABS Resin. A
moisture level of ≤0.1% should be reached before injection molding the resin.
Some modifications may be required depending on the specific molding equipment and part
configuration.